18 Times More Power: MIT Researchers Have Developed Ultrathin Lightweight Solar Cells

Thin Film Solar Cells

The thin-film solar cells weigh about 100 times less than conventional solar cells while generating about 18 times more power-per-kilogram. Credit: Melanie Gonick, MIT

A team of researchers has developed a new technique for producing ultrathin and lightweight solar cells that can be seamlessly integrated into any surface.

Massachusetts Institute of Technology (MIT) engineers have created new ultralight fabric solar cells, which can transform any surface into a power source with ease and speed.

These durable, flexible solar cells, which are much thinner than a human hair, are glued to a strong, lightweight fabric, making them easy to install on a fixed surface. They can provide energy on the go as a wearable power fabric or be transported and rapidly deployed in remote locations for assistance in emergencies. They are one-hundredth the weight of conventional solar panels, generate 18 times more power-per-kilogram, and are made from semiconducting inks using printing processes that can be scaled in the future to large-area manufacturing.

Because they are so thin and lightweight, these solar cells can be laminated onto many different surfaces. For instance, they could be integrated onto the sails of a boat to provide power while at sea, adhered onto tents and tarps that are deployed in disaster recovery operations, or applied onto the wings of drones to extend their flying range. This lightweight solar technology can be easily integrated into built environments with minimal installation needs.

Thin Photovoltaics

MIT researchers have developed a scalable fabrication technique to produce ultrathin, lightweight solar cells that can be stuck onto any surface. Credit: Melanie Gonick, MIT

“The metrics used to evaluate a new solar cell technology are typically limited to their power conversion efficiency and their cost in dollars-per-watt. Just as important is integrability — the ease with which the new technology can be adapted. The lightweight solar fabrics enable integrability, providing impetus for the current work. We strive to accelerate solar adoption, given the present urgent need to deploy new carbon-free sources of energy,” says Vladimir Bulović, the Fariborz Maseeh Chair in Emerging Technology, leader of the Organic and Nanostructured Electronics Laboratory (ONE Lab), director of MIT.nano, and senior author of a new paper describing the work.

Joining Bulović on the paper are co-lead authors Mayuran Saravanapavanantham, an electrical engineering and computer science graduate student at MIT; and Jeremiah Mwaura, a research scientist in the MIT Research Laboratory of Electronics. The research was recently published in the journal Small Methods.

Slimmed down solar

Traditional silicon solar cells are fragile, so they must be encased in glass and packaged in heavy, thick aluminum framing, which limits where and how they can be deployed.

Six years ago, the ONE Lab team produced solar cells using an emerging class of thin-film materials that were so lightweight they could sit on top of a soap bubble. But these ultrathin solar cells were fabricated using complex, vacuum-based processes, which can be expensive and challenging to scale up.

In this work, they set out to develop thin-film solar cells that are entirely printable, using ink-based materials and scalable fabrication techniques.

To produce the solar cells, they use nanomaterials that are in the form of a printable electronic inks. Working in the MIT.nano clean room, they coat the solar cell structure using a slot-die coater, which deposits layers of the electronic materials onto a prepared, releasable substrate that is only 3 microns thick. Using screen printing (a technique similar to how designs are added to silkscreened T-shirts), an electrode is deposited on the structure to complete the solar module.

The researchers can then peel the printed module, which is about 15 microns in thickness, off the plastic substrate, forming an ultralight solar device.

But such thin, freestanding solar modules are challenging to handle and can easily tear, which would make them difficult to deploy. To solve this challenge, the MIT team searched for a lightweight, flexible, and high-strength substrate they could adhere the solar cells to. They identified fabrics as the optimal solution, as they provide mechanical resilience and flexibility with little added weight.

They found an ideal material — a composite fabric that weighs only 13 grams per square meter, commercially known as Dyneema. This fabric is made of fibers that are so strong they were used as ropes to lift the sunken cruise ship Costa Concordia from the bottom of the Mediterranean Sea. By adding a layer of UV-curable glue, which is only a few microns thick, they adhere the solar modules to sheets of this fabric. This forms an ultra-light and mechanically robust solar structure.

“While it might appear simpler to just print the solar cells directly on the fabric, this would limit the selection of possible fabrics or other receiving surfaces to the ones that are chemically and thermally compatible with all the processing steps needed to make the devices. Our approach decouples the solar cell manufacturing from its final integration,” Saravanapavanantham explains.

Outshining conventional solar cells

When they tested the device, the MIT researchers found it could generate 730 watts of power per kilogram when freestanding and about 370 watts-per-kilogram if deployed on the high-strength Dyneema fabric, which is about 18 times more power-per-kilogram than conventional solar cells.

“A typical rooftop solar installation in Massachusetts is about 8,000 watts. To generate that same amount of power, our fabric photovoltaics would only add about 20 kilograms (44 pounds) to the roof of a house,” he says.

They also tested the durability of their devices and found that, even after rolling and unrolling a fabric solar panel more than 500 times, the cells still retained more than 90 percent of their initial power generation capabilities.

While their solar cells are far lighter and much more flexible than traditional cells, they would need to be encased in another material to protect them from the environment. The carbon-based organic material used to make the cells could be modified by interacting with moisture and oxygen in the air, which could deteriorate their performance.

“Encasing these solar cells in heavy glass, as is standard with the traditional silicon solar cells, would minimize the value of the present advancement, so the team is currently developing ultrathin packaging solutions that would only fractionally increase the weight of the present ultralight devices,” says Mwaura.

“We are working to remove as much of the non-solar-active material as possible while still retaining the form factor and performance of these ultralight and flexible solar structures. For example, we know the manufacturing process can be further streamlined by printing the releasable substrates, equivalent to the process we use to fabricate the other layers in our device. This would accelerate the translation of this technology to the market,” he adds.

Reference: “Printed Organic Photovoltaic Modules on Transferable Ultra-thin Substrates as Additive Power Sources” by Mayuran Saravanapavanantham, Jeremiah Mwaura and Vladimir Bulović, 9 December 2022, Small Methods.
DOI: 10.1002/smtd.202200940

The study was funded by the MIT Energy Initiative, the U.S. National Science Foundation, and the Natural Sciences and Engineering Research Council of Canada.

12 Comments on "18 Times More Power: MIT Researchers Have Developed Ultrathin Lightweight Solar Cells"

  1. Sounds promising. How much is it going to cost us?

  2. Pierre Ghislain | January 23, 2023 at 1:34 pm | Reply

    Saying 18 times more power is a mistake because presently the efficiency is already about 20% of the energy received by the sun. Multiply this by 18 is impossible and ridiculous. May be it is 18% more efficiency. So 20% + 18%, may be.

    • Did you even read this properly? It doesn’t claim 18 times more efficient!! It claims 18 times more power per kg, which is not about efficiency, but about building cost. The article also says that they weigh 100 times less than conventional panels. This mean that if 2 panels have the same surface area, the panel made from the new material will produce 0.18 times the power of the conventional panel.

  3. Cannot compare to current commercial technology, without declaring watt per square meter, loss of performance in time and efficiency vs temperature curve. Not clear the development state, if pure research or some kind of ingegnerisation has started

  4. Steve Nordquist | January 24, 2023 at 2:43 am | Reply

    Massachusetts real estate started reaching for the sky when the cost per square foot went up, so I guess it’s possible the standard install -is- 8 kW having cleared the trees. Seriously the numbers are in there, it’s so open access the patent assignees are listed (get in now/keep your cost down,) you just gotta wrangle the hot water or cold side angles. Lello seriously, they say the thing left to do is a protective top and you’re wondering whether they make roof tiles or rectangular panels? Yeah I guess I don’t know their shading troubles or how to run ATSC 3 antennas in wall panels, but something says that’s not gonna hold up first product.

  5. Steve Nordquist | January 24, 2023 at 4:56 am | Reply

    Oh and it’s 18x the power per Kg of silicon solar panels. Before they put a hard pellicle over it for durability. (Will it benefit from refractive patterning as Si & perovskites?)

    Gotta see why fabric under it halved the efficiency in terms of watts per area, lots of reasons to get back to tfa.

  6. This article is very misleading. Solar is measured in power/area, not power/weight. Telling us the power/weight ratio merely tells us that these cells can be produced cheaply. 18 times more power per kg, but weighing 100 times less, means that if I have 2 solar panels with the same surface area, the one made from the new material will produce 0.18 times as much power as the conventional solar cell.

  7. Its great for mobile application but rooftop installation power/KILOGRAM. Thats just silly marketing. Every one can see through that.

  8. Disappointing that no hard power per area information was included. The other commenter’s estimate of only .18x the average retail panel’s power sounds reasonable given the limited info in this article.

    The applications for this technology may be very limited.

  9. John Strickland | January 24, 2023 at 7:05 pm | Reply

    Does anyone know if this material is space-rated – will UV and space radiation deteriorate it faster than existing solar arrays in orbit?
    John Strickland

  10. I will offer my rooftop for experiencing this new device . Boston ready .contact me please.

  11. Hello. I have invented a new way of utilizing voltaic technology to generate free electricity without the use of sunlight,but via 50-75 watt💡 uniquely situated with a 5′ x 2′ self-contained structure, and battery supplied.

Leave a Reply to John Strickland Cancel reply

Email address is optional. If provided, your email will not be published or shared.