Major Milestone Reached for Sewage and Food Waste Biocrude Conversion Process

Reactor Turns Wet Waste Into Biocrude

This reactor turns wet waste into biocrude, which in turn feeds a refining step that turns biocrude into fuels for transportation. Credit: Andrea Starr | Pacific Northwest National Laboratory

Biocrude Passes the 2,000-Hour Catalyst Stability Test

A large-scale demonstration converting biocrude to renewable diesel fuel has passed a significant test, operating for more than 2,000 hours continuously without losing effectiveness. Scientists and engineers led by the U.S. Department of Energy’s Pacific Northwest National Laboratory conducted the research to show that the process is robust enough to handle many kinds of raw material without failing.

“The biocrude oil came from many different sources, including wastewater sludge from Detroit, and food waste collected from prison and an army base,” said John Holladay, a PNNL scientist and co-director of the joint Bioproducts Institute, a collaboration between PNNL and Washington State University. “The research showed that essentially any biocrude, regardless of wet-waste sources, could be used in the process and the catalyst remained robust during the entire run. While this is just a first step in demonstrating robustness, it is an important step.”

The milestone was first described at a virtual conference organized by NextGenRoadFuels, a European consortium funded by the EU Framework Programme for Research and Innovation. It addresses the need to convert biocrude, a mixture of carbon-based polymers, into biofuels. In the near term, most expect that these biofuels will be further refined and then mixed with petroleum-based fuels used to power vehicles.

“For the industry to consider investing in biofuel, we need these kinds of demonstrations that show durability and flexibility of the process,” said Michael Thorson, a PNNL engineer and project manager.

Biocrude to biofuel, the crucial conversion

Just as crude oil from petroleum sources must be refined to be used in vehicles, biocrude needs to be refined into biofuel. This step provides the crucial “last mile” in a multi-step process that starts with renewables such as crop residues, food residues, forestry byproducts, algae, or sewage sludge. For the most recent demonstration, the biocrude came from a variety of sources including converted food waste salvaged from Joint Base Lewis-McChord, located near Tacoma, Wash., and Coyote Ridge Corrections Center, located in Connell, Wash. The initial step in the process, called hydrothermal liquefaction, is being actively pursued in a number of demonstration projects by teams of PNNL scientists and engineers.

Biowaste to Biofuel Process

Wet wastes from sewage treatment and discarded food can provide the raw materials for an innovative process called hydrothermal liquefaction, which converts and concentrates carbon-containing molecules into a liquid biocrude. This biocrude then undergoes a hydrotreating process to produce bio-derived fuels for transportation. Credit: Illustration by Michael Perkins | Pacific Northwest National Laboratory

The “last mile” demonstration project took place at the Bioproducts, Sciences, and Engineering Laboratory on the Richland, Wash. campus of Washington State University Tri-Cities. For 83 days, reactor technician Miki Santosa and supervisor Senthil Subramaniam fed a constant flow of biocrude into carefully honed and highly controlled reactor conditions. The hydrotreating process introduces hydrogen into a catalytic process that removes sulfur and nitrogen contaminants found in biocrude, producing a combustible end-product of long-chain alkanes, the desirable fuel used in vehicle engines. Chemist Marie Swita analyzed the biofuel product to ensure it met standards that would make it vehicle-ready.

Analytical Chemist Marie Swita Tests Biofuel Samples To Measure Purity

Analytical chemist Marie Swita tests biofuel samples to measure purity. Credit: Photo by Andrea Starr | Pacific Northwest National Laboratory

Diverting carbon to new uses

“Processing food and sewage waste streams to extract useful fuel serves several purposes,” said Thorson. Food waste contains carbon. When sent to a landfill, that food waste gets broken down by bacteria that emit methane gas, a potent greenhouse gas and contributor to climate change. Diverting that carbon to another use could reduce the use of petroleum-based fuels and have the added benefit of reducing methane emissions.

The purpose of this project was to show that the commercially available catalyst could stand up to the thousands of hours of continuous processing that would be necessary to make biofuels a realistic contributor to reducing the world’s carbon footprint. But Thorson pointed out that it also showed that the biofuel product produced was of high quality, regardless of the source of biocrude―an important factor for the industry, which would likely be processing biocrude from a variety of regional sources.

Justin Billing

Justin Billing, shown here, and his PNNL colleagues are advancing technologies and approaches to convert different kinds of materials, including food waste, into biofuels. Credit: Photo by Andrea Starr | Pacific Northwest National Laboratory

Indeed, knowing that transporting biocrude to a treatment facility could be costly, modelers are looking at areas where rural and urban waste could be gathered from various sources in local hubs. For example, they are assessing the resources available within a 50-mile radius of Detroit, Mich. There, the sources of potential biocrude feedstock could include food waste, sewage sludge and cooking oil waste. In areas where food waste could be collected and diverted from landfills, much as recycling is currently collected, a processing plant could be up to 10 times larger than in rural areas and provide significant progress toward cost and emission-reduction targets for biofuels.

Commercial biofuels on the horizon

Milestones such as hours of continuous operation are being closely watched by investor groups in the U.S. and Europe, which has set aggressive goals, including being the first climate-neutral continent by 2050 and achieving a 55% reduction in greenhouse gas emissions by 2030. “A number of demonstration projects across Europe aim to commercialize this process in the next few years,” Holladay said.

The next steps for the research team include gathering more sources of biocrude from various waste streams and analyzing the biofuel output for quality. In a new collaboration, PNNL will partner with a commercial waste management company to evaluate waste from many sources. Ultimately, the project will result in a database of findings from various manures and sludges, which could help decide how facilities can scale up economically.

“Since at least three-quarters of the input and output of this process consists of water, the ultimate success of any industrial scale-up will need to include a plan for dealing with wastewater,” said Thorson. This too is an active area of research, with many viable options available in many locations for wastewater treatment facilities.

DOE’s Bioenergy Technologies Office has been instrumental in supporting this project, as well as the full range of technologies needed to make biofuels feasible.

6 Comments on "Major Milestone Reached for Sewage and Food Waste Biocrude Conversion Process"

  1. stephen schaffer | April 12, 2021 at 7:18 am | Reply

    How about the goal being the fuel for electric generation to charge the batteries of electric vehicles that seem to be on the radar- especially in the Detroit area?

  2. This needs to be engineered so that the solid waste shown in the diagram is pure biochar. Biochar is not only highly useful in industrial and agricultural applications, but it sequesters carbon from the atmosphere. It is in fact pure carbon that will not re-enter the carbon cycle for thousands of years.

  3. Application for moon or space station waste would be useful.

  4. How much carbon is produced from supplying the heat needed for the process?

  5. This is a good research I hope my African continent and especially my country Kenya could invest in such technology to hep tackle waste managementthat is becoming an emerging issue.

  6. I’d like more information on what happens to all those byproducts and what the impact is on the environment. Also consideration for the fact that all of the input is organic and belongs in the environment as is. Composting. This is just another case of humans taking something out of a cycle that our planet desperately needs. We need less reliance on fuel. Newer innovations that don’t use giant inputs the planet needs.

Leave a Reply to Dannis Omondi Cancel reply

Email address is optional. If provided, your email will not be published or shared.