Seemingly Magical – How To Fire Projectiles Through Materials Without Breaking Anything

Particle Light Physics Concept

Scientists have developed a model that allows for the accurate prediction of hole formation based on the electron mobility of the material and the charge state of the projectile. This model enables a better understanding of the conditions under which holes will form and those in which they will not.

Researchers at Vienna University of Technology have discovered why sometimes spectacular micro-explosions occur and other times ultra-thin layers of material remain almost intact when charged particles are shot through them.

It may seem like magic that some materials can withstand being shot through with fast, electrically charged ions without exhibiting holes afterward. This phenomenon, which would be impossible at the macroscopic level, becomes possible at the level of individual particles. However, not all materials exhibit this behavior. In recent years, various research groups have conducted experiments with varying results.

Vienna University of Technology researchers have been able to provide a detailed explanation for why some materials are perforated while others are not. This is of particular interest in the processing of thin membranes, which are designed to have tailor-made nano-pores that can trap, hold, or allow specific atoms or molecules to pass through.

Nanoporen Layer

The model developed at the Vienna University of Technology explains why tiny holes – only a few nanometers in size – are formed in some two-dimensional materials when they are bombarded with highly charged ions, but not in others. The effect of nano-hole formation can be exploited to produce novel sieves for certain molecules. Credit: Vienna University of Technology

Ultra-thin materials – graphene and its peers

“Today, there is a whole range of ultrathin materials that consist of only one or a few atomic layers,” says Professor Christoph Lemell of the Institute of Theoretical Physics at the Vienna University of Technology. “Probably the best known of these is graphene, a material made of a single layer of carbon atoms. But research is also being done on other ultrathin materials around the world today, such as molybdenum disulfide.”

In Professor Friedrich Aumayr’s research group at the Institute of Applied Physics at Vienna University of Technology, such materials are bombarded with very special projectiles – highly charged ions. They take atoms, typically noble gases such as xenon, and strip them of a large number of electrons. This creates ions with 30 to 40 times the electrical charge. These ions are accelerated and then hit the thin layer of material with high energy.

Vienna University of Technology Nanoporen Team

The authors of the Vienna University of Technology study: from left to right: Friedrich Aumayr, Christoph Lemell, Anna Niggas, Alexander Sagar Grossek, Richard A. Wilhelm. Credit: David Rath, Vienna University of Technology

“This results in completely different effects depending on the material,” says Anna Niggas, an experimental physicist at the Institute of Applied Physics “Sometimes the projectile penetrates the material layer without any noticeable change in the material as a result. Sometimes the material layer around the impact site is also completely destroyed, numerous atoms are dislodged and a hole with a diameter of a few nanometers is formed.”

The velocity of the electrons

These astonishing differences can be explained by the fact that it is not the momentum of the projectile that is mainly responsible for the holes, but its electric charge. When an ion with multiple positive charges hits the material layer, it attracts a larger amount of electrons and takes them with it. This leaves a positively charged region in the material layer.

What effect this has depends on how fast electrons can move in this material. “Graphene has an extremely high electron mobility. So this local positive charge can be balanced there in a short time. Electrons simply flow in from elsewhere,” Christoph Lemell explains.

In other materials such as molybdenum disulfide, however, things are different: There, the electrons are slower, and they cannot be supplied in time from outside to the impact site. And so a mini-explosion occurs at the impact site: The positively charged atoms, from which the projectile has taken their electrons, repel each other and they fly away – and this creates a nano-sized pore.

“We have now been able to develop a model that allows us to estimate very well in which situations holes are formed and in which they are not – and this depends on the electron mobility in the material and the charge state of the projectile,” says Alexander Sagar Grossek, first author of the publication in the journal Nano Letters.

The model also explains the surprising fact that the atoms knocked out of the material move relatively slowly: The high speed of the projectile does not matter to them; they are removed from the material by electrical repulsion only after the projectile has already passed through the material layer. And in this process, not all the energy of the electric repulsion is transferred to the sputtered atoms – a large part of the energy is absorbed in the remaining material in the form of vibrations or heat.

Both the experiments and the simulations were performed at the Vienna University of Technology. The resulting deeper understanding of atomic surface processes can be used, for example, to specifically equip membranes with tailored “nanopores”. For example, one could build a “molecular sieve” or hold certain atoms in a controlled manner. There are even thoughts of using such materials to filter CO2 from the air.

“Through our findings, we now have precise control over the manipulation of materials at the nanoscale. This provides a whole new tool for manipulating ultrathin films in a precisely calculable way for the first time,” says Alexander Sagar Grossek.

Reference: “Model for Nanopore Formation in Two-Dimensional Materials by Impact of Highly Charged Ions” by Alexander Sagar Grossek, Anna Niggas, Richard A. Wilhelm, Friedrich Aumayr and Christoph Lemell, 18 November 2022, Nano Letters.
DOI: 10.1021/acs.nanolett.2c03894

1 Comment on "Seemingly Magical – How To Fire Projectiles Through Materials Without Breaking Anything"

  1. Is this is possible..Can I join this research work as a zoology student ?? in yours institute

Leave a comment

Email address is optional. If provided, your email will not be published or shared.