Next Gen 3D Printed Catalysts To Propel Hypersonic Flight – Speeds Over 3,800 Mph

Hermeus Hypersonic Plane

Artist’s impression of a hypersonic plane. Credit: Hermeus

Ultra-efficient 3D printed catalysts could help solve the challenge of overheating in hypersonic aircraft and offer a revolutionary solution to thermal management across countless industries.

Developed by researchers at RMIT University in Melbourne, Australia, the highly versatile catalysts are cost-effective to make and simple to scale.

The team’s lab demonstrations show the 3D printed catalysts could potentially be used to power hypersonic flight while simultaneously cooling the system.

The research is published in the Royal Society of Chemistry journal, Chemical Communications.

Lead researcher Dr. Selvakannan Periasamy said their work tackled one of the biggest challenges in the development of hypersonic aircraft: controlling the incredible heat that builds up when planes fly at more than five times the speed of sound.

“Our lab tests show the 3D printed catalysts we’ve developed have great promise for fuelling the future of hypersonic flight,” Periasamy said.

“Powerful and efficient, they offer an exciting potential solution for thermal management in aviation — and beyond.

“With further development, we hope this new generation of ultra-efficient 3D printed catalysts could be used to transform any industrial process where overheating is an ever-present challenge.”

3D Printed Catalysts

A range of experimental designs for the 3D printed catalysts. Credit: RMIT University

Need for speed

Only a few experimental planes have reached hypersonic speed (defined as above Mach 5 — over 3,800 mph (6,100km/h) or 1 mile (1.7km) per second).

In theory, a hypersonic aircraft could travel from London to New York in less than 90 minutes but many challenges remain in the development of hypersonic air travel, such as the extreme heat levels.

First author and PhD researcher Roxanne Hubesch said using fuel as a coolant was one of the most promising experimental approaches to the overheating problem.

“Fuels that can absorb heat while powering an aircraft are a key focus for scientists, but this idea relies on heat-consuming chemical reactions that need highly efficient catalysts,” Hubesch said.

“Additionally, the heat exchangers where the fuel comes in contact with the catalysts must be as small as possible, because of the tight volume and weight constraints in hypersonic aircraft.”

To make the new catalysts, the team 3D printed tiny heat exchangers made of metal alloys and coated them with synthetic minerals known as zeolites.

The researchers replicated at lab scale the extreme temperatures and pressures experienced by the fuel at hypersonic speeds, to test the functionality of their design.

Miniature chemical reactors

When the 3D printed structures heat up, some of the metal moves into the zeolite framework — a process crucial to the unprecedented efficiency of the new catalysts.

“Our 3D printed catalysts are like miniature chemical reactors and what makes them so incredibly effective is that mix of metal and synthetic minerals,” Hubesch said.

“It’s an exciting new direction for catalysis, but we need more research to fully understand this process and identify the best combination of metal alloys for the greatest impact.”

The next steps for the research team from RMIT’s Centre for Advanced Materials and Industrial Chemistry (CAMIC) include optimizing the 3D printed catalysts by studying them with X-ray synchrotron techniques and other in-depth analysis methods.

The researchers also hope to extend the potential applications of the work into air pollution control for vehicles and miniature devices to improve indoor air quality — especially important in managing airborne respiratory viruses like COVID-19.  

CAMIC Director, Distinguished Professor Suresh Bhargava, said the trillion-dollar chemical industry was largely based on old catalytic technology.

“This third generation of catalysis can be linked with 3D printing to create new complex designs that were previously not possible,” Bhargava said.

“Our new 3D printed catalysts represent a radical new approach that has real potential to revolutionize the future of catalysis around the world.”

The 3D printed catalysts were produced using Laser Powder Bed Fusion (L-PBF) technology in the Digital Manufacturing Facility, part of RMIT’s Advanced Manufacturing Precinct.

Reference: “Zeolites on 3D-Printed Open Metal Framework Structure: Metal migration into zeolite promoted catalytic cracking of endothermic fuels for flight vehicles” by Roxanne Hubesch, Maciej Mazur, Karl Föger, P. R. Selvakannan and Suresh K. Bhargavan, 25 August 2021, Chemical Communications.
DOI: 10.1039/D1CC04246G

4 Comments on "Next Gen 3D Printed Catalysts To Propel Hypersonic Flight – Speeds Over 3,800 Mph"

  1. Courtney Jones | March 7, 2022 at 1:22 pm | Reply


  2. I’m a bit confused. What about hypersonic flight necessitates fuel being delivered via Zeolite-based Fischer-Troph Synthesis? Is the limitation right now fuel flow and does this have a higher flow rate than traditional suction from the jet engines aided by pumps?

  3. Dear Scitechdaily,

    I may be be wrong, but the image you show is a 3D printed Heat exchanger not a catalyst. Or are they integrated such that they perform both functions?

  4. The application of this technology to thermal control in hypersonic flight is pretty ingenious, although this article didn’t explain it at all. Since the reaction is endothermic you can use it to absorb heat from the skin of the vehicle. The cracked hydrocarbon fuel can then be burned in the engines. A crucial issue is what to do about coking? At some point the catalyst must be regenerated by burning off the coke, and that process is exothermic.

Leave a comment

Email address is optional. If provided, your email will not be published or shared.