MIT engineers have discovered that the mobula ray, a type of filter-feeding aquatic ray, utilizes a unique mechanism to feed and breathe simultaneously, which could revolutionize industrial water filters.
By studying the geometry of the ray’s mouth and gill structures, they developed a blueprint for more efficient filtration systems, balancing permeability with selectivity to enhance performance without increasing energy consumption.
Filter Feeding and Engineering Insights
Filter feeders are found throughout the animal kingdom, from tiny crustaceans, corals, and krill to larger species like mollusks, barnacles, basking sharks, and baleen whales. Now, MIT engineers have discovered that one of these filter feeders, the mobula ray, has evolved a unique feeding method that could inspire better industrial water filter designs.
In a recent paper published in the Proceedings of the National Academy of Sciences, the researchers describe the filter-feeding system of the mobula ray, a group of aquatic rays that includes two manta ray species and seven devil ray species. Mobula rays feed by swimming with their mouths wide open through plankton-rich waters, capturing plankton as water flows into their mouths and out through their gills.
Inside the ray’s mouth, parallel, comb-like structures, called plates, line each side, channeling water toward its gills. The MIT team found that these plates are precisely spaced to cause plankton particles to bounce deeper into the ray’s mouth instead of escaping through the gills. Additionally, the gills extract oxygen from the outflowing water, allowing the ray to feed and breathe at the same time.
“We show that the mobula ray has evolved the geometry of these plates to be the perfect size to balance feeding and breathing,” says study author Anette “Peko” Hosoi, the Pappalardo Professor of Mechanical Engineering at MIT.
Engineering Applications from Nature’s Design
The engineers fabricated a simple water filter modeled after the mobula ray’s plankton-filtering features. They studied how water flowed through the filter when it was fitted with 3D-printed plate-like structures. The team took the results of these experiments and drew up a blueprint, which they say designers can use to optimize industrial cross-flow filters, which are broadly similar in configuration to that of the mobula ray.
“We want to expand the design space of traditional cross-flow filtration with new knowledge from the manta ray,” says lead author and MIT postdoc Xinyu Mao PhD ’24. “People can choose a parameter regime of the mobula ray so they could potentially improve overall filter performance.”
Hosoi and Mao co-authored the new study with Irmgard Bischofberger, associate professor of mechanical engineering at MIT.
Exploring Filtration Trade-offs in Industry and Nature
The new study grew out of the group’s focus on filtration during the height of the Covid pandemic, when the researchers were designing face masks to filter out the virus. Since then, Mao has shifted focus to study filtration in animals and how certain filter-feeding mechanisms might improve filters used in industry, such as in water treatment plants.
Mao observed that any industrial filter must strike a balance between permeability (how easily fluid can flow through a filter), and selectivity (how successful a filter is at keeping out particles of a target size). For instance, a membrane that is studded with large holes might be highly permeable, meaning a lot of water can be pumped through using very little energy. However, the membrane’s large holes would let many particles through, making it very low in selectivity. Likewise, a membrane with much smaller pores would be more selective yet also require more energy to pump the water through the smaller openings.
“We asked ourselves, how do we do better with this tradeoff between permeability and selectivity?” Hosoi says.
As Mao looked into filter-feeding animals, he found that the mobula ray has struck an ideal balance between permeability and selectivity: The ray is highly permeable, in that it can let water into its mouth and out through its gills quickly enough to capture oxygen to breathe. At the same time, it is highly selective, filtering and feeding on plankton rather than letting the particles stream out through the gills.
The researchers realized that the ray’s filtering features are broadly similar to that of industrial cross-flow filters. These filters are designed such that fluid flows across a permeable membrane that lets through most of the fluid, while any polluting particles continue flowing across the membrane and eventually out into a reservoir of waste.
The team wondered whether the mobula ray might inspire design improvements to industrial cross-flow filters. For that, they took a deeper dive into the dynamics of mobula ray filtration.
Dynamic Filtration Techniques Inspired by Mobula Rays
As part of their new study, the team fabricated a simple filter inspired by the mobula ray. The filter’s design is what engineers refer to as a “leaky channel” — effectively, a pipe with holes along its sides. In this case, the team’s “channel” consists of two flat, transparent acrylic plates that are glued together at the edges, with a slight opening between the plates through which fluid can be pumped. At one end of the channel, the researchers inserted 3D-printed structures resembling the grooved plates that run along the floor of the mobula ray’s mouth.
The team then pumped water through the channel at various rates, along with colored dye to visualize the flow. They took images across the channel and observed an interesting transition: At slow pumping rates, the flow was “very peaceful,” and fluid easily slipped through the grooves in the printed plates and out into a reservoir. When the researchers increased the pumping rate, the faster-flowing fluid did not slip through, but appeared to swirl at the mouth of each groove, creating a vortex, similar to a small knot of hair between the tips of a comb’s teeth.
“This vortex is not blocking water, but it is blocking particles,” Hosoi explains. “Whereas in a slower flow, particles go through the filter with the water, at higher flow rates, particles try to get through the filter but are blocked by this vortex and are shot down the channel instead. The vortex is helpful because it prevents particles from flowing out.”
The team surmised that vortices are the key to mobula rays’ filter-feeding ability. The ray is able to swim at just the right speed that water, streaming into its mouth, can form vortices between the grooved plates. These vortices effectively block any plankton particles — even those that are smaller than the space between plates. The particles then bounce across the plates and head further into the ray’s cavity, while the rest of the water can still flow between the plates and out through the gills.
The researchers used the results of their experiments, along with dimensions of the filtering features of mobula rays, to develop a blueprint for cross-flow filtration.
“We have provided practical guidance on how to actually filter as the mobula ray does,” Mao offers.
“You want to design a filter such that you’re in the regime where you generate vortices,” Hosoi says. “Our guidelines tell you: If you want your plant to pump at a certain rate, then your filter has to have a particular pore diameter and spacing to generate vortices that will filter out particles of this size. The mobula ray is giving us a really nice rule of thumb for rational design.”
Reference: “Permeability–selectivity trade-off for a universal leaky channel inspired by mobula filters” by Xinyu Mao, Irmgard Bischofberger and Anette E. Hosoi, 25 November 2024, Proceedings of the National Academy of Sciences.
DOI: 10.1073/pnas.2410018121
This work was supported, in part, by the U.S. National Institutes of Health, and the Harvey P. Greenspan Fellowship Fund.
Never miss a breakthrough: Join the SciTechDaily newsletter.
Follow us on Google and Google News.