Scientists Have Created a Method To Prevent Deadly Infections Without Antibiotics

Coronavirus Infection Danger Concept

The newly developed method involves putting a small coating of zwitterionic material on a device and binding it to the underlying substrate using UV light. The resultant barrier prevents bacteria and other harmful organic materials from attaching and causing infection.

UCLA researchers have created a new surface treatment that prevents bacteria from sticking to medical devices such as catheters and stents.

A hospital or medical clinic may seem like the last place you’d expect to get a bad infection, yet almost 1.7 million Americans do each year, resulting in nearly 100,000 deaths from infection-related complications and $30 billion in direct medical expenditures.

According to specialists, medical equipment such as catheters, stents, heart valves, and pacemakers are the primary culprits, accounting for two-thirds of all infections. Their surfaces often become coated with dangerous bacterial films. However, a unique surface treatment developed by a team led by the University of California, Los Angeles (UCLA) scientists could help improve the safety of these devices while also reducing the financial strain on the healthcare system.

The new technique, which has been tested in both laboratory and clinical settings, involves depositing a thin coating of zwitterionic material on the surface of a device and permanently bonding that layer to the underlying substrate using ultraviolet light irradiation. The resultant barrier prevents germs and other potentially dangerous organic materials from adhering to the surface and infecting people.

The team’s results were published in the journal Advanced Materials on May 19th, 2022.

Harmful Microbes Medical Devices

Harmful microbes grow freely on implanted medical devices. A new method to apply a surface coating treatment to medical devices is likely to improve their safety, reducing patient complications and deaths. Credit: Amir Sheikhi/Penn State

In the laboratory, researchers applied the surface treatment to several commonly used medical device materials, and then tested the modified materials’ resistance to various types of bacteria, fungi, and proteins. They found that the treatment reduced biofilm growth by more than 80% — and in some cases up to 93%, depending on the microbial strain.

“The modified surfaces exhibited robust resistance against microorganisms and proteins, which is precisely what we sought to achieve,” said Richard Kaner, UCLA’s Dr. Myung Ki Hong Professor of Materials Innovation and senior author of the research. “The surfaces greatly reduced or even prevented biofilm formation.

Richard Kaner

Senior author of the research, Richard Kaner. Credit: Reed Hutchinson/UCLA

“And our early clinical results have been outstanding,” Kaner added.

The clinical research involved 16 long-term urinary catheter users who switched to silicone catheters with the new zwitterionic surface treatment. This modified catheter is the first product made by a company Kaner founded out of his lab, called SILQ Technologies Corp., and has been cleared for use in patients by the Food and Drug Administration.

Ten of the patients described their urinary tract condition using the surface-treated catheter as “much better” or “very much better,” and 13 chose to continue using the new catheter over conventional latex and silicone options after the study period ended.

“One patient came to UCLA a few weeks ago to thank us for changing her life — something that, as a materials scientist, I never thought was possible,” Kaner said. “Her previous catheters would become blocked after four days or so. She was in pain and needed repeated medical procedures to replace them. With our surface treatment, she now comes in every three weeks, and her catheters work perfectly without encrustation or occlusion — a common occurrence with her previous ones.”

Such catheter-related urinary tract problems are illustrative of the issues plaguing other medical devices, which, once inserted or implanted, can become breeding grounds for bacteria and harmful biofilm growth, said Kaner, a member of the California NanoSystems Institute at UCLA who is also a distinguished professor of chemistry and biochemistry, and of materials science and engineering. The pathogenic cells pumped out by these highly resilient biofilms then cause recurring infections in the body.

In response, medical staff routinely give strong antibiotics to patients using these devices, a short-term fix that poses a longer-term risk of creating life-threatening, antibiotic-resistant “superbug” infections. The more widely and frequently antibiotics are prescribed, Kaner said, the more likely bacteria are to develop resistance to them. A landmark 2014 report by the World Health Organization recognized this antibiotic overuse as an imminent public health threat, with officials calling for an aggressive response to prevent “a post-antibiotic era in which common infections and minor injuries which have been treatable for decades can once again kill.”

“The beauty of this technology,” Kaner said, “is that it can prevent or minimize the growth of biofilm without the use of antibiotics. It protects patients using medical devices — and therefore protects all of us — against microbial resistance and the proliferation of superbugs.”

The surface treatment’s zwitterion polymers are known to be extremely biocompatible, and they absorb water very tightly, forming a thin hydration barrier that prevents bacteria, fungi, and other organic materials from adhering to surfaces, Kaner said. And, he noted, the technology is highly effective, non-toxic, and relatively low in cost compared with other current surface treatments for medical devices, like antibiotic- or silver-infused coatings.

Beyond its use in medical devices, the surface treatment technique could have non-medical applications, Kaner said, potentially extending the lifetimes of water-treatment devices and improving lithium-ion battery performance.

Funding sources for the study included the National Institutes of Health, the National Science Foundation, the Canadian Institutes of Health Research, SILQ Technologies Corp, and the UCLA Sustainability Grand Challenge.

Reference: “A Readily Scalable, Clinically Demonstrated, Antibiofouling Zwitterionic Surface Treatment for Implantable Medical Devices” by Brian McVerry, Alexandra Polasko, Ethan Rao, Reihaneh Haghniaz, Dayong Chen, Na He, Pia Ramos, Joel Hayashi, Paige Curson, Chueh-Yu Wu, Praveen Bandaru, Mackenzie Anderson, Brandon Bui, Aref Sayegh, Shaily Mahendra, Dino Di Carlo, Evgeniy Kreydin, Ali Khademhosseini, Amir Sheikhi and Richard B. Kaner, 22 March 2022, Advanced Materials.
DOI: 10.1002/adma.202200254

2 Comments on "Scientists Have Created a Method To Prevent Deadly Infections Without Antibiotics"

  1. Francis Gauci | June 25, 2022 at 3:44 am | Reply

    It’s a pleasure to read especially your new devices as well as new technology.

    It would be a pleasure if you keep informing me.

    Rds, Francis from Malta

  2. Just use silver plating. Or copper. No need to reinvent the wheel, these surfaces already kill that stuff.

Leave a comment

Email address is optional. If provided, your email will not be published or shared.