Energy Harvesting From Skin Temperature for Battery-Free, Wearable Electronics

Compliant Thermoelectric Generator

Conceptual illustration of a compliant TEG with soft electrodes and soft heat conductors (s-HCs) for self-powered circuit applications. The left inset is a photograph of bismuth telluride (Bi2Te3)-based thermoelectric (TE) legs and the right inset is an optical image of a cross-section of the compliant TEG. Scale bars, 5 and 1 mm. Credit: Korea Institute of Science and Technology (KIST)

Development of flexible thermoelectric devices with maximized flexibility and high efficiency; enabling mass production with high yield by automated process, commercialization of self-powered wearable devices.

A thermoelectric device is an energy conversion device that utilizes the voltage generated by the temperature difference between both ends of a material; it is capable of converting heat energy, such as waste heat from industrial sites, into electricity that can be used in daily life. Existing thermoelectric devices are rigid because they are composed of hard metal-based electrodes and semiconductors, hindering the full absorption of heat sources from uneven surfaces. Therefore, recent studies were actively conducted on the development of flexible thermoelectric devices capable of generating energy in close contact with various heat sources such as human skins and hot water pipes.

The Korea Institute of Science and Technology (KIST) announced that a collaborative research team led by Dr. Seungjun Chung from the Soft Hybrid Materials Research Center and Professor Yongtaek Hong from the Department of Electrical and Computer Engineering at Seoul National University (SNU, President OH Se-Jung) developed flexible thermoelectric devices with high power generation performance by maximizing flexibility and heat transfer efficiency. The research team also presented a mass-production plan through an automated process including a printing process.

Hot Surface Warning Gloves

Schematic illustration of hot surface warning gloves with a self-powered LED system and light masking packages. Photographs showing a demonstration of the TEG-attached gloves when they are used to grasp various hot objects such as a bottle and a kettle. The insets show enlarged view of the self-powered system and packages. The conformal contact between the TEG-attached gloves and the 3D surfaces of the heat sources results in a bright “H” sign without any assistance from an external power supply. Scale bars, 5, 5 cm, and 5 mm. Credit: Korea Institute of Science and Technology (KIST)

Concerning existing substrates used for research on flexible thermoelectric devices, their heat energy transfer efficiency is low as a result of very low thermal conductivity. Their heat absorption efficiency is also low due to lack of flexibility, forming a heat shield layer, e.g., air, when in contact with a heat source. To address this issue, organic-material-based thermoelectric devices with high flexibility have been under development, but their application on wearables is not easy because of its significantly lower performance compared to existing inorganic-material-based rigid thermoelectric devices.

Seungjun Chung

Dr. Seungjun Chung from the Soft Hybrid Materials Research Center, KIST. Credit: Korea Institute of Science and Technology (KIST)

The aforementioned research team improved the flexibility while lowering the resistance of the thermoelectric device by connecting an inorganic-material-based high-performance thermoelectric device to a stretchable substrate composed of silver nanowires. The developed thermoelectric device showed excellent flexibility, thereby allowing stable operation even when it is bent or stretched. In addition, metal particles with high thermal conductivity were inserted inside the stretchable substrate to increase the heat transfer capacity by 800% (1.4 W/mK) and power generation by a factor higher than three. (When the temperature difference was 40 ? or more between both ends of the developed thermoelectric device, 7 mW/cm2 of electricity was generated. When attached to human skin, 7 μW/cm2 of electricity was generated from the body temperature only.) Simultaneously, the researchers automated the entire complex process, from the soft-platform process to the development of the thermoelectric device, thus enabling mass-production of the device.

The developed device can be used as a high-temperature sensor in industrial sites or as a battery-free distance detection sensor for autonomous driving by using the temperature difference inside and outside of a car. Consequently, the device is expected to be able to solve the power-source issue for a battery-based sensor system, which has a risk of explosion in high-temperature environments.

Dr. Seungjun Chung, with KIST, said: “This research showed that it is possible to operate actual wearables such as high-temperature sensor gloves using external heat sources. Going forward, we will develop a flexible thermoelectric platform that can operate wearables with only body temperature.” He went on to say: “Our research findings are significant in that the functional composite material, thermoelectric device platform, and high-yield automated process developed in this study will be able to contribute to the commercialization of battery-free wearables in the future.”

Reference: “High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronics” by Byeongmoon Lee, Hyeon Cho, Kyung Tae Park, Jin-Sang Kim, Min Park, Heesuk Kim, Yongtaek Hong and Seungjun Chung, 23 November 2020, Nature Communications.
DOI: 10.1038/s41467-020-19756-z

This research was supported by the Ministry of Science and ICT (MSIT), and was conducted as part of the Institutional R&D Program of KIST, the Creative Materials Discovery Program of the National Research Foundation of Korea, the Creative Convergence Research Project, and the Global Frontier Project. The research results were published in the latest issue of the international journal Nature Communications (IF: 12.121).

2 Comments on "Energy Harvesting From Skin Temperature for Battery-Free, Wearable Electronics"

  1. Years ago we had watches that were self winding in that your wrist movement kept them going. No batteries and no winding. This seems like a really expensive and still experimental way of doing the same thing. Of course, it probably does take up less space. Pretty sure there are rare minerals involved.

  2. Knowledge Sourcing | June 18, 2021 at 2:54 am | Reply

    Energy Harvesting is like the addition of power up into an electric component which plays an important role to provide energy as per system requirements. Positive trends towards increasing electric vehicles especially in megacities are major growth factors of energy harvesting systems globally. Thanks for sharing such a valuable article

Leave a Reply to Bonnie Davis Cancel reply

Email address is optional. If provided, your email will not be published or shared.