This year, more than a third of the world will suffer from shortages of potable water. This number is expected to rise by 50% by 2025 and that’s one of the reasons why the desalination techniques of seawater are so important, because they will allow coastal communities to address local shortfalls.
The new technology was developed by Kamalesh Sirkar, a chemical engineer from the New Jersey Institute of Technology, and it’s comprised of a direct-contact membrane distillation system (DCMD) that will distill drinking water out of up to 20% salt-concentrated brine. After 25%, the salt precipitates out of the solution and could damage the system.
The salt concentration of normal seawater is 3.5%, meaning that the system can reprocess the same water several times. Heated seawater flows across a membrane strung between a series of hollow tubes that are made out of a porous yet hydrophobic fiber. This means that only water vapor can be osmotically transferred. Cold distillate water runs through each of the tubes in a direction that’s perpendicular to the seawater, allowing for a temperature gradient. This gradient causes the vapor to form on the tubes. The vapor diffuses through the pores and condenses inside of them, joining the flow of cold distillate water.